A6 Series AC Servo Motor Driver

Product Description

LICHUAN® warmly welcome you to wholesale A6 Series AC Servo Motor Driver from our factory. Our products are CE certified and currently have a large amount of factory inventory. We will provide you with good service and factory discounted prices

220V AC A6 servo motor driver specifications, The A6 series servo driver with a 17-bit encoder, which corresponds to 131072 pulses per revolution, which greatly improves the positioning accuracy of the motor, and can make the motor more stable at low speed and less speed error.
1.Support 2500ppr .17bit encoder AC servo motor .
2. Match for AC servo motor rated power from 50W-2.6KW

Chapter 2 Electrical Specifications

Input power	CONTROL POWER	Single phase 220VAC
Input power	MAIN POWER SUPPLY	Single Phase/Three Phase 220VAC
Working environment	Temperature	0～45℃
	Humidity	No condensation ≤90% RH or less
	Elevation	Altitude ≤1000M
	Installation environment	Non-corrosive gases, flammable gases, oil mist or dust, etc.
	Installation method	VERTICAL INSTALLATION
Encoder feedback		2500 plr (resolution: 10000), incremental encoder
Control signal	Digital Input	10 channels of normal digital input, with configurable function.
Control signal	Digital Output	6 channels of normal digital input, with configurable function.
Pulse signals	Input	2 high-speed inputs: differential (600K) and single-ended (200K) pulses. Support pulse input mode: PULS+DIR,A+B,CW+CCW
Pulse signals	Output	3-way high-speed pulse output, output signal form: 5V differential signal. 1-way Z signal single-ended output signal.
Analog quantity signal	Input	2-way analog inputs, 12-bit resolution, input range -9.5 to +9.5V. Where Al2 is fixed as the torque limit input.
Analog quantity signal	Output	None
Messaging function		RS485 communication, Modbus protocol. The main controller can control the position/speed/torque of the servo via RS485, up to 32 control stations.
Display panel and button operation		5 buttons (Mode, Set, Left, Up, Down) and 6 digital tubes
Regenerative discharge braking resistor		Built-in 100W40Q braking resistor. An extemal braking resistor is required for frequent braking.

Combination of drive model and motor

Driver model	Motor Model	Power (KW)
LCDA6-XXA2	005L02-40M00130	0.05
	01L02-40M00330	0.1
	02L02-60M00630	0.2
LCDA6-XXB2	04L02-60M01330	0.4
	06L02-60M01930	0.6
	04L02-80M01330	0.4
	07L02-80M02430	0.75
	07M02-80M03520	0.75
	07L02-90M02430	0.75
	07M02-90M03520	0.75
	06L02-110M02030	0.6
	08L02-110M04020	0.8
LCDA6-XXC2	10L02-80M04025	1.0
	10L02-90M04025	1.0
	10L02-130M04025	1.0
LCDA6-XXC3	12L02-110M04030	1.2
	15L02-110M05030	1.5
	12L02-110M06020	1.2
	18L02-110M06030	1.8
	13L02-130M05025	1.3
	15L02-130M06025	1.5
	10M02-130M10010	1.0
	15M02-130M10015	1.5
LCDA6-XXD3	20L02-130M07725	2.0
	26M02-130M10025	2.6
	23M02-130M15015	2.3